•  Home-News

    • NEWS

    Sep 20, 2026

    Pipe Cutting Machine vs. Tube Laser Cutting: Selecting the Cost-Effective System for Structural Steel

    For structural steel, a pipe cutting machine (circular/cold saw or band saw) is more cost-effective than a tube laser on thick-wall and H-beam work; the laser wins only on thin-wall tube needing holes and contours in one setup. Choose by wall and complexity.

    Sep 20, 2026

    CNC Tube Bending Machine vs. Manual Rotary Benders: A B2B ROI and Wall Uniformity Comparison

    A CNC tube bending machine beats a manual rotary bender on wall uniformity and ROI above ~500 repeat bends/month, paying back in 8-14 months via lower scrap and no skilled-operator bottleneck. Manual wins for prototypes and one-offs.

    Sep 20, 2026

    Best Aluminum Cutting Saw Configurations for Burr-Free Extrusion Profile Processing

    For burr-free aluminum extrusion cutting, use a carbide downward-cutting circular saw with a profiled zero-clearance fixture, high RPM, slow feed, and mist/flood coolant. Burrs come from the tooth exiting thin walls - fix with geometry and clamping.

    Sep 20, 2026

    How to Fix Tooth Stripping on an Automatic Band Saw Machine When Cutting Titanium and Alloy Steel

    Tooth stripping on a band saw cutting titanium or alloy steel is work-hardening from too-low speed and too-high feed. Fix it by raising blade speed, cutting feed 25-40%, using a positive-rake variable-pitch blade, and flooding coolant.

    Sep 20, 2026

    Selecting the Right Bar Chamfering Machine for High-Precision Automotive Fastener Production

    For automotive fastener lines, choose a servo-driven double-end bar chamfering machine with synchronized face+chamfer+center, +-0.02mm repeatability, and magazine feed - it holds squareness on both ends in one clamp, which single-end machines cannot.

    Sep 20, 2026

    Cold Saw Machine vs. Band Saw Machine: Which Cutoff Equipment Delivers Lower Cost-Per-Cut?

    For metal cutoff, a cold saw machine beats a band saw on cost-per-cut above roughly 4,000-6,000 cuts/month: near-zero kerf, no deburr, 4-7s cycles. A band saw wins at low volume, large sections, or mixed shapes. Here is the cost model and the breakeven.

    Sep 20, 2026

    How to Choose the Best CNC Circular Saw Machine for High-Volume Metal Cutoff Lines

    For high-volume metal cutoff, the best CNC circular saw is a fully automatic, rigid-framed machine with a TCT or cermet blade, servo bar feed, and integrated chip handling — sized by capacity, cuts-per-minute, and cost-per-cut. Here is the 7-point selection framework KEENSAW uses.

    Sep 11, 2026

    Band Saw vs Circular Saw vs Cold Saw vs Laser: The Complete Metal Cutting Decision Guide | KEENSAW

    If you run a job shop or a production cell, the question is never “which saw is best” in the abstract — it is “which method is best for this material, this volume and this tolerance?” A band saw that is perfect for low-volume billets will bottleneck a high-volume bar li

    Sep 11, 2026

    Cutting Speeds & Feeds by Material: Stainless, Alloy, Carbon and Titanium Sawing Parameters | KEENSAW

    Two saws, the same bar, two completely different results. One finishes a clean, burr-free cut in seconds with a blade that lasts for weeks. The other burns the blade, smears the surface and stalls the cell. The difference is almost never the machine — it is the cutting speed and feed matched t

    Sep 11, 2026

    Circular Saw vs Band Saw: Cost per Cut & TCO Model | KEENSAW

    Comparing a CNC carbide circular saw with a band saw by sticker price is the wrong first step. This guide gives production planners a five-bucket total-cost-of-ownership model and a worked example, so the choice comes from cost per cut — blade wear, cycle time, kerf scrap, labour and capital — not the showroom. Includes a decision matrix and FAQ for sawing-machine ROI.

    ONLINE INQUIRY

    Contact us if you have any questions we will reply as soon aspossible

    LISHUI KEENSAW MACHINE CO., LTD
    No.272 Juxian Road,Huzhen Town,
    Jinyun County, Lishui City, Zhejiang, China
    PRODUCTS
    Copyright © Lishui Keensaw Machine Co., Ltd. All rights reserved.